DOS Command Index
Information about all current DOS commands
APPEND
(External)
APPEND ;
APPEND [d:]path[;][d:]path[...]
APPEND [/X:on|off][/path:on|off] [/E]
Displays or sets the search path for data files. DOS will search the
specified path(s) if the file is not found in the current path.
ASSIGN
(External)
ASSIGN x=y [...] /sta
Redirects disk drive requests to a different drive.
ATTRIB
(External)
ATTRIB [d:][path]filename [/S]
ATTRIB [+R|-R] [+A|-A] [+S|-S] [+H|-H] [d:][path]filename [/S]
Sets or displays the read-only, archive, system, and hidden attributes of
a file or directory.
BACKUP
(External)
BACKUP d:[path][filename]
d:[/S][/M][/A][/F:(size)] [/P][/D:date] [/T:time] [/L:[path]filename]
Makes a backup copy of one or more files. (In DOS Version 6, this program
is stored on the DOS supplemental disk.)
BREAK
(Internal)
BREAK =on|off
Used from the DOS prompt or in a batch file or in the CONFIG.SYS file to
set (or display) whether or not DOS should check for a Ctrl + Break key
combination.
BUFFERS
(Internal)
BUFFERS=(number),(read-ahead number)
Used in the CONFIG.SYS file to set the number of disk buffers (number)
that will be available for use during data input. Also used to set a value
for the number of sectors to be read in advance (read-ahead) during data
input operations.
CALL
(Internal)
CALL [d:][path]batchfilename [options]
Calls another batch file and then returns to current batch file to
continue.
CHCP
(Internal)
CHCP (codepage)
Displays the current code page or changes the code page that DOS will use.
CHDIR
(Internal)
CHDIR (CD) [d:]path
CHDIR (CD)[..]
Displays working (current) directory and/or changes to a different
directory.
CHKDSK
(External)
CHKDSK [d:][path][filename] [/F][/V]
Checks a disk and provides a file and memory status report.
CHOICE
(Internal)
CHOICE [/C[:]keys] [/N][/S][/T[:]c,nn] [text]
Used to provide a prompt so that a user can make a choice while a batch
program is running.
CLS (Clear Screen)
(Internal)
CLS
Clears (erases) the screen.
COMMAND
(External)
COMMAND [d:][path] [device] [/P][/E:(size)] [/MSG][/Y [/C (command)|/K
(command)]
Starts a new version of the DOS command processor (the program that loads
the DOS Internal programs).
COMP
(External)
COMP [d:][path][filename] [d:][path][filename] [/A][/C][/D][/L][/N:(number)]
Compares two groups of files to find information that does not match. (See
FC command).
COPY
(Internal)
COPY [/Y|-Y] [/A][/B] [d:][path]filename [/A][/B] [d:][path][filename]
[/V]
or
COPY [/Y|-Y][/A][/B] [d:][path]filename+[d:][path]filename[...][d:][path][filename]
[/V]
Copies and appends files.
COUNTRY
(Internal)
COUNTRY=country code,[code page][,][d:][filename]
Used in the CONFIG.SYS file to tell DOS to use country-specific text
conventions during processing.
CTTY
(Internal)
CTTY (device)
Changes the standard I/O (Input/Output) device to an auxiliary device.
DATE
(Internal)
DATE mm-dd-yy
Displays and/or sets the system date.
DBLSPACE
(External)
DBLSPACE / automount=drives
DBLSPACE /chkdsk [/F] [d:]
DBLSPACE /compress d: [/newdrive=host:] [/reserve=size] [/F]
DBLSPACE /create d: [/newdrive=host:] [/reserve=size] [/size=size]
DBLSPACE /defragment [d:] ]/F]
DBLSPACE /delete d:
DBLSPACE /doubleguard=0|1
DBLSPACE /format d:
DBLSPACE [/info] [d:]
DBLSPACE /list
DBLSPACE /mount[=nnn] host: [/newdrive=d:]
DBLSPACE /ratio[=ratio] [d:] [/all]
DBLSPACE /size[=size] [/reserve=size] d:
DBLSPACE /uncompress d:
DBLSPACE /unmount [d:]
A program available with DOS 6.0 that allows you to compress information
on a disk.
DEBUG
(External)
DEBUG [pathname] [parameters]
An MS-DOS utility used to test and edit programs.
DEFRAG
(External)
DEFRAG [d:] [/F][/S[:]order] [/B][/skiphigh [/LCD|/BW|/GO] [/H]
DEFRAG [d:] [/V][/B][/skiphigh] [/LCD]|/BW|/GO] [/H]
Optimizes disk performance by reorganizing the files on the disk.
DEL (ERASE)
(Internal)
DEL (ERASE) [d:][path]filename [/P]
Deletes (erases) files from disk.
DELOLDOS
(External)
DELOLDOS [/B]
Deletes all files from previous versions of DOS after a 5.0 or 6.0
installation.
DELTREE
(External)
DELTREE [/Y] [d:]path [d:]path[...]
Deletes (erases) a directory including all files and subdirectories that
are in it.
DEVICE
(Internal)
DEVICE=(driver name)
Used in the CONFIG.SYS file to tell DOS which device driver to load.
DEVICEHIGH
(Internal)
DEVICEHIGH=(driver name)
Like DEVICE, DEVICEHIGH is used in the CONFIG.SYS file to tell DOS which
device driver software to use for devices; however, this option is used to
install the device driver into the upper memory area.
DIR
(Internal)
DIR [d:][path][filename] [/A:(attributes)] [/O:(order)]
[/B][/C][/CH][/L][/S][/P][/W]
Displays directory of files and directories stored on disk.
DISKCOMP
(External)
DISKCOMP [d:] [d:][/1][/8]
Compares the contents of two diskettes.
DISKCOPY
(External)
DISKCOPY [d:] [d:][/1][/V][/M]
Makes an exact copy of a diskette.
DOS
(Internal)
DOS=[high|low],[umb|noumb]
Used in the CONFIG.SYS file to specify the memory location for DOS. It is
used to load DOS into the upper memory area and to specify whether or not
the upper memory blocks will be used.
DOSKEY
(External)
DOSKEY [reinstall] [/bufsize=size][/macros][/history][/insert|/overstrike]
[macroname=[text]]
Loads the Doskey program into memory which can be used to recall DOS
commands so that you can edit them.
DOSSHELL
(External)
DOSSHELL [/B] [/G:[resolution][n]]|[/T:[resolution][n]]
Initiates the graphic shell program using the specified screen resolution.
DRIVPARM
(Internal)
DRIVPARM= /D:(number) [/C] [/F:(form factor)] [/H:(number)] [/I][ /N][/S:(number)]
[/T:(tracks)]
Used in the CONFIG.SYS file to set parameters for a disk drive.
ECHO
(Internal)
ECHO on|off
ECHO (message)
Displays messages or turns on or off the display of commands in a batch
file.
EDIT
(External)
EDIT [d:][path]filename [/B][/G][/H][/NOHI]
Starts the MS-DOS editor, a text editor used to create and edit ASCII text
files.
EMM386
(External)
EMM386 [on|off|auto] [w=on|off]
Enables or disables EMM386 expanded-memory support on a computer with an
80386 or higher processor.
EXE2BIN
(External)
EXE2BIN [d:][path]filename [d:][path]filename
Converts .EXE (executable) files to binary format.
EXIT
(Internal)
EXIT
Exits a secondary command processor.
EXPAND
(External)
EXPAND [d:][path]filename [[d:][path]filename[ . . .]]
Expands a compressed file.
FASTHELP
(External)
FASTHELP [command][command] /?
Displays a list of DOS commands with a brief explanation of each.
FASTOPEN
(External)
FASTOPEN d:[=n][/X]
Keeps track of the locations of files for fast access.
FC
(External)
FC [/A][/C][/L][/Lb n][/N][/T][/W][number] [d:][path]filename [d:][path]filename
or (for binary comparisons)
FC [/B][/number] [d:][path]filename [d:][path]filename
Displays the differences between two files or sets of files.
FCBS
(Internal)
FCBS=(number)
Used in the CONFIG.SYS file to specify the number of file-control blocks
for file sharing.
FDISK
(External)
FDISK [/status]
Prepares a fixed disk to accept DOS files for storage.
FILES
(Internal)
FILES=(number)
Used in the CONFIG.Sys file to specify the maximum number of files that
can be open at the same time.
FIND
(External)
FIND [/V][/C][/I][/N] ÒstringÓ [d:][path]filename[...]
Finds and reports the location of a specific string of text characters in
one or more files.
FOR
(Internal)
FOR %%(variable) IN (set) DO (command)
or (for interactive processing)
FOR %(variable) IN (set) DO (command)
Performs repeated execution of commands (for both batch processing and
interactive processing).
FORMAT
(External)
FORMAT d:[/1][/4][/8][/F:(size)] [/N:(sectors)] [/T:(tracks)][/B|/S][/C][/V:(label)]
[/Q][/U][/V]
Formats a disk to accept DOS files.
GOTO
(Internal)
GOTO (label)
Causes unconditional branch to the specified label.
GRAFTABL
(External)
GRAFTABL [(code page)]
GRAFTABL [status]
Loads a table of character data into memory (for use with a color/graphics
adapter).
GRAPHICS
(External)
GRAPHICS [printer type][profile] [/B][/R][/LCD][/PB:(id)] [/C][/F][/P(port)]
Provides a way to print contents of a graphics screen display.
HELP
(External)
HELP [command] [/B][/G][/H][/NOHI]
Displays information about a DOS command.
IF
(Internal)
IF [NOT] EXIST filename (command) [parameters]
IF [NOT] (string1)==(string2) (command) [parameters]
IF [NOT] ERRORLEVEL (number) (command) [parameters]
Allows for conditional operations in batch processing.
INCLUDE
(Internal)
INCLUDE= blockname
Used in the CONFIG.SYS file to allow you to use the commands from one
CONFIG.SYS block within another.
INSTALL
(Internal)
INSTALL=[d: ][\path]filename [parameters]
Used in the CONFIG.SYS file to load memory-resident programs into
conventional memory.
INTERLINK
(External)
INTERLINK [client[:]=[server][:]]
Connects two computers via parallel or serial ports so that the computers
can share disks and printer ports.
INTERSVR
(External)
INTERSVR [d:][...][/X=d:][...] [/LPT:[n|address]] [/COM:[n|address]][/baud:rate]
[/B][/V]
INTERSVR /RCOPY
Starts the Interlink server.
JOIN
(External)
JOIN d: [d:path]
JOIN d: [/D]
Allows access to the directory structure and files of a drive through a
directory on a different drive.
KEYB
(External)
KEYB [xx][,][yyy][,][d:][path]filename [/E][/ID:(number)]
Loads a program that replaces the support program for U. S. keyboards.
LABEL
(External)
LABEL [d:][volume label]
Creates or changes or deletes a volume label for a disk.
LASTDRIVE
(Internal)
LASTDRIVE=(drive letter)
Used in the CONFIG.SYS file to set the maximum number of drives that can
be accessed.
LOADFIX
(Internal)
LOADFIX [d:][path]filename [parameters]
Ensures that a program is loaded above the first 64K of conventional
memory, and runs the program.
LOADHIGH
(Internal)
LOADHIGH (LH) [d:][path]filename [parameters]
Loads memory resident application into reserved area of memory (between
640K-1M).
MEM
(External)
MEM [/program|/debug|/classify|/free|/module(name)] [/page]
Displays amount of installed and available memory, including extended,
expanded, and upper memory.
MEMMAKER
(External)
MEMMAKER [/B][/batch][/session][/swap:d] [/T][/undo][/W:size1,size2]
Starts the MemMaker program, a program that lets you optimize your
computer's memory.
MENUCOLOR
(Internal)
MENUCOLOR=textcolor,[background]
Used in the CONFIG.SYS file to set the colors that will be used by DOS to
display text on the screen.
MENUDEFAULT
(Internal)
MENUDEFAULT=blockname, [timeout]
Used in the CONFIG.SYS file to set the startup configuration that will be
used by DOS if no key is pressed within the specified timeout period.
MENUITEM
(Internal)
MENUITEM=blockname, [menutext]
Used in the CONFIG.SYS file to create a start-up menu from which you can
select a group of CONFIG.SYS commands to be processed upon reboot.
MIRROR
(External)
MIRROR [d:]path [d:] path [...]
MIRROR [d1:][d2:][...] [/T(drive)(files)] [/partn][/U][/1]
Saves disk storage information that can be used to recover accidentally
erased files.
MKDIR
(MD) (Internal)
MKDIR (MD) [d:]path
Creates a new subdirectory.
MODE
(External)
MODE n
MODE LPT#[:][n][,][m][,][P][retry]
MODE [n],m[,T]
MODE (displaytype,linetotal)
MODE COMn[:]baud[,][parity][,][databits][,][stopbits][,][retry]
MODE LPT#[:]=COMn [retry]
MODE CON[RATE=(number)][DELAY=(number)]
MODE (device) CODEPAGE PREPARE=(codepage) [d:][path]filename
MODE (device) CODEPAGE PREPARE=(codepage list) [d:][path]filename
MODE (device) CODEPAGE SELECT=(codepage)
MODE (device) CODEPAGE [/STATUS]
MODE (device) CODEPAGE REFRESH
Sets mode of operation for devices or communications.
MORE
(External)
MORE < (filename or command)
(name)|MORE
Sends output to console, one screen at a time.
MOVE
(Internal)
MOVE [/Y|/-Y] [d:][path]filename[,[d:][path]filename[...]] destination
Moves one or more files to the location you specify. Can also be used to
rename directories.
MSAV
(External)
MSAV [d:] [/S|/C][/R][/A][/L][/N][/P][/F][/video][/mouse]
MSAV /video
Scans your computer for known viruses.
MSBACKUP
(External)
MSBACKUP [setupfile] [/BW|/LCD|/MDA]
Used to backup or restore one or more files from one disk to another.
MSCDEX
(External)
MSCDEX /D:driver [/D:driver2. . .] [/E][/K][/S][/V][/L:letter] [/M:number]
Used to gain access to CD-ROM drives (new with DOS Version 6).
MSD
(External)
MSD [/B][/I]
MSD [/I] [/F[d:][path]filename [/P[d:][path]filename [/S[d:][path]filename
Provides detailed technical information about your computer.
NLSFUNC
(External)
NLSFUNC [d:][path]filename
Used to load a file with country-specific information.
NUMLOCK
(Internal)
NUMLOCK=on|off
Used in the CONFIG.SYS file to specify the state of the NumLock key.
PATH
(Internal)
PATH;
PATH [d:]path[;][d:]path[...]
Sets or displays directories that will be searched for programs not in the
current directory.
PAUSE
(Internal)
PAUSE [comment]
Suspends execution of a batch file until a key is pressed.
POWER
(External)
POWER [adv:max|reg|min]|std|off]
Used to turn power management on and off, report the status of power
management, and set levels of power conservation.
PRINT
(External)
PRINT [/B:(buffersize)] [/D:(device)] [/M:(maxtick)] [/Q:(value] [/S:(timeslice)][/U:(busytick)]
[/C][/P][/T] [d:][path][filename] [...]
Queues and prints data files.
PROMPT
(Internal)
PROMPT [prompt text] [options]
Changes the DOS command prompt.
RECOVER
(External)
RECOVER [d:][path]filename
RECOVER d:
Resolves sector problems on a file or a disk. (Beginning with DOS Version
6, RECOVER is no longer available ).
REM
(Internal)
REM [comment]
Used in batch files and in the CONFIG.SYS file to insert remarks (that
will not be acted on).
RENAME (REN)
(Internal)
RENAME (REN) [d:][path]filename [d:][path]filename
Changes the filename under which a file is stored.
REPLACE
(External)
REPLACE [d:][path]filename [d:][path] [/A][/P][/R][/S][/U][/W]
Replaces stored files with files of the same name from a different storage
location.
RESTORE
(External)
RESTORE d: [d:][path]filename [/P][/S][/B:mm-dd-yy] [/A:mm-dd-yy][/E:hh:mm:ss]
[/L:hh:mm:ss] [/M][/N][/D]
Restores to standard disk storage format files previously stored using the
BACKUP command.
RMDIR (RD)
(Internal)
RMDIR (RD) [d:]path
Removes a subdirectory.
SCANDISK
(External)
SCANDISK [d: [d: . . .]|/all][/checkonly|/autofix[/nosave]|/custom][/surface][/mono][/nosummay]
SCANDISK volume-name[/checkonly|/autofix[/nosave]|/custom][/mono][/nosummary]
SCANDISK /fragment [d:][path]filename
SCANDISK /undo [undo-d:][/mono]
Starts the Microsoft ScanDisk program which is a disk analysis and repair
tool used to check a drive for errors and correct any problems that it
finds.
SELECT
(External)
SELECT [d:] [d:][path] [country code][keyboard code]
Formats a disk and installs country-specific information and keyboard
codes (starting with DOS Version 6, this command is no longer available).
SET
(Internal)
SET (string1)=(string2)
Inserts strings into the command environment. The set values can be used
later by programs.
SETVER
(External)
SETVER [d:]:path][filename (number)][/delete][/quiet]
Displays the version table and sets the version of DOS that is reported to
programs.
SHARE
(External)
SHARE [/F:space] [/L:locks]
Installs support for file sharing and file locking.
SHELL
(Internal)
SHELL=[d:][path]filename [parameters]
Used in the CONFIG.SYS file to specify the command interpreter that DOS
should use.
SHIFT
(Internal)
SHIFT
Increases number of replaceable parameters to more than the standard ten
for use in batch files.
SORT
(External)
SORT [/R][/+n] < (filename)
SORT [/R][/+n] > (filename2)
Sorts input and sends it to the screen or to a file.
STACKS
(Internal)
STACKS=(number),(size)
Used in the CONFIG.SYS file to set the number of stack frames and the size
of each stack frame.
SUBMENU
(Internal)
SUBMENU=blockname, [menutext]
Used in the CONFIG.SYS file to create a multilevel menu from which you can
select start-up options.
SUBST
(External)
SUBST d: d:path
SUBST d: /D
Substitutes a virtual drive letter for a path designation.
SWITCHES
(Internal)
SWITCHES= [/K][/F][/N][/W]
Used in the CONFIG.SYS file to configure DOS in a special way; for
example, to tell DOS to emulate different hardware configurations.
SYS
(External)
SYS [source] d:
Transfers the operating system files to another disk.
TIME
(Internal)
TIME hh:mm[:ss][.cc][A|P]
Displays current time setting of system clock and provides a way for you
to reset the time.
TREE
(External)
TREE [d:][path] [/A][/F]
Displays directory paths and (optionally) files in each subdirectory.
TYPE
(Internal)
TYPE [d:][path]filename
Displays the contents of a file.
UNDELETE
(External)
UNDELETE [d:][path][filename] [/DT|/DS|/DOS]
UNDELETE [/list|/all|/purge[d:]|/status|/load|/U|/S[d:]|/Td:[-entries]]
Restores files deleted with the DELETE command.
UNFORMAT
(External)
UNFORMAT d: [/J][/L][/test][/partn][/P][/U]
Used to undo the effects of formatting a disk.
VER
(Internal)
VER
Displays the DOS version number.
VERIFY
(Internal)
VERIFY on|off
Turns on the verify mode; the program checks all copying operations to
assure that files are copied correctly.
VOL
(Internal)
VOL [d:]
Displays a disk's volume label.
VSAFE
(External)
VSAFE [/option[+|-]...] [/NE][/NX][Ax|/Cx] [/N][/D][/U]
VSAFE is a memory-resident program that continuously monitors your
computer for viruses and displays a warning when it finds one.
XCOPY
(External)
XCOPY [d:][path]filename [d:][path][filename] [/A][/D:(date)]
[/E][/M][/P][/S][/V][/W][Y\-Y]
Copies directories, subdirectories, and files.
Syntax Notes
To be functional, each DOS command must be entered in a particular way:
this command entry structure is known as the command's "syntax." The
syntax "notation" is a way to reproduce the command syntax in print.
For example, you can determine the items that are optional, by looking for
information that is printed inside square brackets. The notation [d:], for
example, indicates an optional drive designation. The command syntax, on
the other hand, is how YOU enter the command to make it work.
Command Syntax Elements
1. Command Name
The DOS command name is the name you enter to start the DOS program (a few
of the DOS commands can be entered using shortcut names). The DOS command
name is always entered first. In this book, the command is usually printed
in uppercase letters, but you can enter command names as either lowercase
or uppercase or a mix of both.
2. Space
Always leave a space after the command name.
3. Drive Designation
The drive designation (abbreviated in this book as "d:") is an option for
many DOS commands. However, some commands are not related to disk drives
and therefore do not require a drive designation. Whenever you enter a DOS
command that deals with disk drives and you are already working in the
drive in question, you do not have to enter the drive designator. For
example, if you are working in drive A (when the DOS prompt A> is showing
at the left side of the screen) and you want to use the DIR command to
display a directory listing of that same drive, you do not have to enter
the drive designation. If you do not enter a drive designation, DOS always
assumes you are referring to the drive you are currently working in
(sometimes called the "default" drive).
4. A Colon
When referring to a drive in a DOS command, you must always follow the
drive designator with a colon (:) (this is how DOS recognizes it as a
drive designation).
5. Pathname
A pathname (path) refers to the path you want DOS to follow in order to
act on the DOS command. As described in Chapter 3, it indicates the path
from the current directory or subdirectory to the files that are to be
acted upon.
6. Filename
A filename is the name of a file stored on disk. As described in Chapter
1, a filename can be of eight or fewer letters or other legal characters.
7. Filename Extension
A filename extension can follow the filename to further identify it. The
extension follows a period and can be of three or fewer characters. A
filename extension is not required.
8. Switches
Characters shown in a command syntax that are represented by a letter or
number and preceded by a forward slash (for example, "/P") are command
options (sometimes known as "switches"). Use of these options activate
special operations as part of a DOS command's functions.
9. Brackets
Items enclosed in square brackets are optional; in other words, the
command will work in its basic form without entering the information
contained inside the brackets.
10. Ellipses
Ellipses (...) indicate that an item in a command syntax can be repeated
as many times as needed.
11. Vertical Bar
When items are separated by a vertical bar (|), it means that you enter
one of the separated items. For example: ON | OFF means that you can enter
either ON or OFF, but not both
|